craft-along

Archived Posts from this Category

Valentine’s Countdown Calendar with Tutorial

Posted by on 15 Jan 2009 | Tagged as: calendar, craft-along, needle-felting, tutorial, Valentine's Day, wool felt

The calendar is finally finished and I’m pretty pleased with the result! Here are some pictures of the final product:

Empty calendar

Calendar with everyone on the tree

If you want to recreate one of your own (for personal use only), here’s what you’ll need:

Supplies:

  • Pattern for the Valentine’s Calendar shapes (PDF)
  • Pattern for the Valentine’s Calendar pockets (PDF)
  • a piece of wool or wool-blend felt (I used light pink in size 8″ x11 5/8″)
  • a piece of flannel for the pocket border (I used brown in size 16 3/4″ x 21,” but would probably do 17″ x 21 1/2″ if I were making another one)
  • scraps of wool or wool-blend felt in various colors to cut into animal shapes, decorations, banner birds and pocket numbers
  • a length of wool or wool-blend felt to form the banner, plus felt for making the birds
  • a sheet of wool or wool-blend felt for the pockets
  • wool roving in assorted colors, most importantly brown and black, as well as colors for the tree, grass and animals (In addition to brown, black and green, I used orange, gray, light pink, dark pink, white, red, blue, purple, yellow)
  • a piece of very thick cardboard (so a staple won’t go all the way through), sized a little smaller than your flannel

Tools:

  • felting needles and foam pad, a tool to hold the felting needles is recommended
  • stapler
  • small, sharp scissors for fabric
  • large scissors or blade for cutting cardboard
  • needle
  • pen for tracing patterns on fabric
  • fabric glue

Techniques:

  • needle-felting — If this is your first time needle-felting, don’t be intimidated. I have needle-felted the wool onto my little sheep ornaments and I have a somewhat failed attempt to needle-felt a pumpkin, but that’s my entire needle-felting resume
  • blanket-stitching — there’s a great tutorial here

Step 1. Create the tree
In order to create the tree, first lay a very thin layer of roving in your leaf colors on your background felt on the foam pad. I recommend using at least two shades of the same color for your leaves and really teasing the wool apart to make it thin. Then lay a thick layer of dark brown roving — the more shade variations the better — to form your trunk and main branches. Pull apart the wool as you continue to create forks and more branches. I curved the branches to form a sort of of lower arc beneath the leaves for a rounded look, but you can make your tree into anything you like. Here is what mine looked like at this stage:

Valentine tree before needle-felting

For my browns, I have a wonderful bag of alpaca roving our friends Charlie and Sarah of Pearbudget fame brought me from their alpaca farm neighbors. It’s a great assortment of various browns mixed together, so when I formed the tree, it happened by accident that the very dark brown followed the curve of the tree and the lowest branch on the right. I remember Michelle teaching me how to draw trees as a child. By drawing the line darker and thicker on one side of the tree and on the lowest branch corresponding to that side, she showed me how to create a shadow, giving my tree more depth and realism. While it happened accidentally this time, I would try to recreate it if I made another one.

The next step is to actually needle felt the tree and leaves onto the background. Try to keep your needle(s) straight so they don’t break. Basically just poke around in the roving, shaping branches and roots as you go. The fibers will be pulled through to the other side and sort of knitted into the felt background. I added more branches in the center, and you can always add more — needle-felting is mostly very forgiving, though the needles are not, so be careful! Here’s what mine looked like after that stage:

Valentine tree after leaf background and tree felting

I then added a couple of layers of leaf colors over the whole tree and needle-felted those, though not as intensely as I did the trunk, to leave a more airy feel to them. Here’s a picture, though I ended up adding a little more roving at the top to give it a rounder feel:

Valentine tree with leaves felted

Finally, I added a little green grass around the roots. Voila! The tree is done!

Step 2. Create the animals and other pocket goodies
Print out the animal pattern, cut out the shapes, trace them onto felt, and cut out the pieces. I chose colors of felt that wouldn’t look odd if edges of them showed around the needle-felting. This is where you will discover how free-form needle-felting is, and how it will sometimes lead to masterpieces and sometimes, well, sometimes not.

For each animal, pick the colors of roving you want. I would usually felt a very thin layer of roving to hide the base felt, and then start adding a little dimension by shaping and needle-felting on additional roving for the tails or ears or faces. By patiently needle-felting repeatedly along the same line, you can create indentations to give your work more form and depth.

Here are the animals and other pocket inhabitants. Just start with the felt base and see where your needling takes you!

mushroom and flower
Mushroom Flower

bird and mouse
Bird 2 Mouse

robin and butterfly
Bird 1 Butterfly

lollipop and owl
Lollipop Owl

heart and squirrel
Heart Squirrel

hedgehog and rabbit
Hedgehog Rabbit

deer and fox
Deer Fox

I made the lollipop by rolling two thin strips of different color roving into skinny snakes, then twisting them together before felting them to the base in a spiral pattern. I loved some of these, felt sort of “meh” about others and really didn’t like the poor squirrel. He was an example of when adding more and more roving to try to fix a mistake just makes things worse. Tony could not identify his species, so I think that qualifies him as a fail. I didn’t have the right color brown for the deer, and the tiny flower was difficult to give much detail, but I love, love, love the fox, all curled up in that bushy, snuggly tail of his. See, I wasn’t just being modest about the squirrel.

Step 3. Create the pockets and numbers
Print out and cut out the pockets and numbers. Before proceeding, check to make sure your needle-felted pocket inhabitants would actually fit in the pockets, in case you’ve added more roving or detail than I did. Add a little allowance if this is the case when you trace the pockets. For the numbers, I found it helpful to trace them backwards so that I didn’t need to worry about pen marks showing up on the fronts.

Cut out the pockets and numbers. I used fabric glue to glue the numbers onto the pockets, being sure to stay far enough away from sides and bottom to allow for stitching the pockets onto the border with large blanket-stitching. You can also stitch them on if you have an extra forty hours or so that you weren’t sure how to spend.

Step 4. Create the bird banner border
Print out the banner, bird and small banner heart patterns, cut them out and trace them onto felt. Carefully plan out the spacing for Happy Valentine’s Day. I’d recommend using a very thin pen or pencil because I free-handed it and ended up having to cut off a bit of the end of the banner, which meant I also had to reshape my birds a bit. It wasn’t a big deal, but the letter stitching was not very enjoyable since I kept wondering where it would end and I also started to make the letters in different sizes and had to backtrack a few times. I used 6-ply embroidery floss for the letter-stitching. After I had stitched the letters, I added a heart at each end of the banner, blanket-stitching them on with one-ply floss.

For the birds, I needle-felted a bit of roving onto their bellies, and also needle-felted their beaks and eyes, but chose to leave the rest of them as just wool felt.

Step 5. Create the pocket border
Now you have your finished tree picture, your animals, your pockets and your banner, but you still need a border. Take your piece of flannel and center the tree picture on it. Spend as much time as you need to lay out the pockets around the picture and the bird banner along the top. You can tuck the raw end of the birds’ wings a little under the banner. Be patient while planning the layout. Remember to leave enough room along the edges to wrap it around the cardboard for stapling and make sure there’s enough space between the pockets that little fingers can reach in and pick out the inhabitant.

Once you have your layout just the way you want it, use just enough fabric glue to hold everything on until you can stitch it. Make sure not to glue the middle of the pockets, since they will need to be open. Just add a thin layer of glue along the edge, preferably so close to the edge that you won’t be stitching through it with your blanket stitch, which can be rough when the glue has dried hard. For the center tree picture, you can put the glue a little further in to miss the stitches, but it should be close enough to the edge that you’ll be able to stitch evenly without bunching the flannel.

The stitching is pretty time-consuming, but can be done snuggled on the couch under a blanket watching a movie, which is my favorite kind of crafting! I used fairly deep blanket stitches to hold the pockets on, since I figured they’d get a little wear and tear with little fingers reaching in for their treasures. Just be sure they aren’t so deep that the treasures no longer fit in the pockets! I used medium-length stitches for the tree picture, and tiny stitches for the banner and birds.

Finally, place the entire calendar over your piece of cardboard, cutting the cardboard so that it is large enough to form a background for the pockets and banner, with a little flannel along the edges, but small enough that you can wrap some flannel around it and staple it to the back. My piece of cardboard ended up being about 15″ x 19 1/4″ for my 16 3/4″ x 21″ piece of flannel. When I said in the supply list that I would have used a slightly larger piece of flannel, that was just to I would have a little bit more to wrap around and staple. Though it may hold just fine with the size I have. Here’s what the back looks like:

Back of calendar

Step 6. Fill the pockets and enjoy

The pocket inhabitants *should* stick to the wool, but mine aren’t doing it terribly reliably.  If I sort of rub them against the picture, they stick a little better.  That’s why I decided to make a cardboard back, so that I could lean it back a little, instead of having a wall hanging, which was my original intention.

Here is a picture of the calendar with full pockets:

Full calendar

And here is one with everyone peeking out of the pockets:
Calendar with everyone peeking

I have to thank my sweet husband, who spent hours scanning and reconfiguring pdfs, programming code, photographing the steps and keeping the kids busy while I worked.  I couldn’t have done it without him!

Enjoy, and please leave a comment if you decide to make one — I’d love to see them!

Happy Crafting!

Announcing our first craft-along: A Valentine’s Day countdown calendar

Posted by on 03 Jan 2009 | Tagged as: craft-along, Valentine's Day

We’re ready to start on our first craft-along and we’ve chosen to make a Valentine’s Day Countdown calendar.  The only guidelines are to have some sort of countdown to Valentine’s Day for the first fourteen days in February and to have it completed by January 14th.  It can be two-dimensional, three-dimensional, out of paper, fabric, wood — anything you like!  We’ll post our calendars with tutorials on January 14th, giving anyone who wants to make one enough time to do so before February.  Feel free to link to your own calendars in the comments and remember to photograph the process if you’d like to post a tutorial.  We will definitely feature our favorites!!  Stay tuned in the meantime for other crafty goodness.  Happy crafting!